Have Questions?
A unique one-step aerosol formulation that restores or changes the color of vinyl
surfaces and low-pile carpets. Ideal for use on car interiors, vinyl boat interiors, vinyl
motorcycle seats, vinyl office furniture, vinyl luggage, vinyl outdoor furniture, and auto
and boat carpeting. Computer matched to OEM standards. 12 colors! All dyes are
Packed 12 cans per case. California/OTC and VOC Compliant.
FOR USE ON VINYL: Clean surface thoroughly with #713 Special Cleaner to remove grease,
grime, silicone treatments, etc. Mask off areas not to be coated and surrounding areas to
protect these surfaces from overspray. Test a small area for compatibility before proceeding.
Use at room temperature of 70°- 80°F (21°-27° C) with adequate ventilation only. Shake can for
one minute after mixing ball rattles and occasionally between coats. With point opening of spray
nozzle approximately 12-14 inches from surface, move can back and forth with a mist coat and
allow to dry. If clogging develops, remove spray button with a twisting motion and clean. Do not
stick pin or other object into can. Gently replace spray button with a twisting motion with top of
can and spray button opening pointing away from you. Follow with several thin coats to achieve
desired results. If coating sags or runs, you are too close or applying too heavily. Clean spray
button immediately after use by turning can upside down and pressing spray button until no
paint comes out. Allow 24 hours before areas are exposed to body friction such as car seats,
etc.
FOR USE ON CARPETING: Utilizing the same directions above, while applying thin coats, use
a stiff nylon brush to keep fibers separated while drying. Repeat process until color is even. This
product is not recommended for use on long nap carpets.
Technical Data